Dynamo-X Industrial

Dynamo-X Industrial

At-a-Glance

• SKU / Reorder code: K1.1 / Black 1.1
• Category: Heavy-duty general purpose stripper/degreaser
• Primary jobs: Heavy degreasing • floor finish stripping • hard-surface cleanup • restoration smoke/soot cleaning
• Dilution range: 1:1 to 1:128 (label)
• Flammability: Non-flammable (SDS §9)
• pH (1% solution): 11.5–12.5 (SDS §9)
• Key warnings: Always dilute. Do not use full strength. Do not let solution dry on surfaces. Rinse thoroughly. Do not allow mixture to remain on aluminum; soft metals (aluminum, zinc, copper, brass) may be damaged—test first (label).
• One-click SDS download required on page.

Where it wins

• Dial-a-strength cleaning: one dilution ladder covers heavy degreasing through light wipe-downs (label).
• Non-flammable concentrate: easier handling in many facilities vs. typical solvent cleaners (SDS §9).
• Built for ugly soils: grease/oil, wax buildup, oxidation film, and smoke/soot residue (label).
• Clear crew rules: dilute, don’t let it dry, rinse, and test soft metals (label).

Use cases

• Kitchens / food areas: ovens, grills, hoods, greasy floors & walls, grease filters (label).
• Fleet / shop: engines, equipment, trucks/tractors, auto bodies, whitewall tires (label).
• Floors: floor finish stripping; greasy concrete (label).
• Restoration: smoke & soot on walls; fireplace brick/stone (label).
• Laundry: presoak & spotting (label).

Mix guide (label ratios only)
Use hot or cold water. Always dilute. Do not use full strength.

• 1:1 — carbonized food on ovens/grills; heavy grease; printing plate inks
• 1:2 — grease filter cleaning
• 1:4 — heavy degreasing (hoods, grills, walls, engines, boats, trucks, auto bodies)
• 1:8 — floor finish stripping; greasy concrete; grease pits/chutes; smoke/soot cleanup; medium degreasing; laundry spotting
• 1:16 — food processing areas; machinery; quarry tile & marble; light wax stripping
• 1:32 — immersion/hot tank; pressure spraying; vinyl/acoustical walls/ceilings; A/C cleaning; whitewalls; rubber marks
• 1:42 — soak dirty rags/dust mops/overalls overnight
• 1:64 — desktops; stainless wipe-down
• 1:64–1:128 — painted walls/surfaces (work bottom-up; wipe off with plain water); light-duty cleaning
• 1:128 — fiberglass; venetian blinds; light-duty cleaning (floors/walls/furniture/ceramic; boats/trucks/auto bodies)

Safety & compatibility

• DANGER: Corrosive. Causes severe skin burns and serious eye damage (H314/H318) (SDS §2).
• Wear protective gloves and eye/face protection. Avoid breathing mist/spray (SDS §2).
• Do not allow mixture to remain on aluminum. Test first on soft metals and rinse thoroughly (label).
• Do not let solution dry on surfaces. Rinse thoroughly, especially at stronger mixes (label).